Case-IH 7240 Magnum or John Deere 8110 T?
Which should you choose?
The figures split: the Case-IH 7240 Magnum is ahead on three-point lift and forward gears; the John Deere 8110 T is ahead on maximum permissible mass.
- The Case-IH 7240 Magnum suits loader and hydraulic implement work better on this data: 44% (2,172 kg / 4,788 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 7240 Magnum | 8110 T | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 146.6 kW (196.6 hp)Traktorenlexikon, “Case-IH 7240” | 140.4 kW (188.3 hp)Traktorenlexikon, “John Deere 8110T” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 7240 Magnum and the 8110 T. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 7240 Magnum and the 8110 T. |
| Which pumps more oil for implements? | 109.8 L/min (29.0 gpm)Traktorenlexikon, “Case-IH 7240” | 120.4 L/min (31.8 gpm)Traktorenlexikon, “John Deere 8110T” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 7,148 kg (15,759 lb)Traktorenlexikon, “Case-IH 7240” | 4,976 kg (10,971 lb)Traktorenlexikon, “John Deere 8110T” | AheadThe Case-IH 7240 Magnum has 44% more lift (2,172 kg / 4,788 lb) than the John Deere 8110 T (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 8,097 kg (17,851 lb)Traktorenlexikon, “Case-IH 7240” | 10,727 kg (23,649 lb)Traktorenlexikon, “John Deere 8110T” | Ahead (a fact, not an advantage)The John Deere 8110 T is 32% heavier (2,630 kg / 5,798 lb) than the Case-IH 7240 Magnum (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,575 kg (25,519 lb)Traktorenlexikon, “Case-IH 7240” | 14,288 kg (31,500 lb)Traktorenlexikon, “John Deere 8110T” | AheadThe John Deere 8110 T has 23% higher maximum permissible mass (2,713 kg / 5,981 lb) than the Case-IH 7240 Magnum (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Case-IH 7240” | 16Traktorenlexikon, “John Deere 8110T” | AheadThe Case-IH 7240 Magnum has 50% more forward gears (8 gears) than the John Deere 8110 T (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Case-IH 7240” | — | No figureNo call on a creeper range: not stated for the 8110 T. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Case-IH 7240” | 30 km/h (18.6 mph)Traktorenlexikon, “John Deere 8110T” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “Case-IH 7240” | 1000 rpmTraktorenlexikon, “John Deere 8110T” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH 7240” | independentTraktorenlexikon, “John Deere 8110T” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Case-IH 7240” | TracksTraktorenlexikon, “John Deere 8110T” | DifferDrive differs: the Case-IH 7240 Magnum 4WD and the John Deere 8110 T Tracks — tracks and wheels are different kinds of running gear, not called. |
| Which is newer, and what about parts? | 1994–1997 | 2000–2002 | Ahead (a fact, not an advantage)The John Deere 8110 T is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH 7240 Magnum has 44% more lift (2,172 kg / 4,788 lb) than the John Deere 8110 T (both lift at the hitch ends, as stated by the source).
- The John Deere 8110 T is 32% heavier (2,630 kg / 5,798 lb) than the Case-IH 7240 Magnum (both unladen weight, as stated by the source).
- The John Deere 8110 T has 23% higher maximum permissible mass (2,713 kg / 5,981 lb) than the Case-IH 7240 Magnum (both maximum permissible mass, as stated by the source).
- The Case-IH 7240 Magnum has 50% more forward gears (8 gears) than the John Deere 8110 T (both forward gears, as stated by the source).
- The John Deere 8110 T is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on PTO independence: every PTO is independent.
- Drive differs: the Case-IH 7240 Magnum 4WD and the John Deere 8110 T Tracks — tracks and wheels are different kinds of running gear, not called.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources