Case-IH 5230 (DT) vs Hürlimann 909 XT

11 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 5230 (DT) and the 909 XT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Case-IH 5230 (DT) and Hürlimann 909 XT, field by field
Field	5230 (DT)	909 XT	Gap
Engine
Engine power, claimed claimed	97.6 hp	93.6 hp	—
Engine declared	CUMMINS NCE 6-590	Hürlimann H-1000.4 WT-2	differs
Displacement declared	5.88 L	4.00 L	+47% 5230 (DT)
Maximum torque declared	262 lb·ft · 355 N·m	243 lb·ft · 329 N·m	+8% 5230 (DT)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Pedal-operated dry SLH single-plate clutch as driving clutch	—
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	19.9 gpm · 75.3 L/min	16.1 gpm · 61.0 L/min	+23% 5230 (DT)
Three-point lift at ends declared	9,870 lb · 4,477 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	9,877 lb · 4,480 kg	9,480 lb · 4,300 kg	—
Wheelbase declared	103.7 in · 2,634 mm	93.4 in · 2,373 mm	+11% 5230 (DT)
Length declared	172.8 in · 4,390 mm	162.3 in · 4,123 mm	+6% 5230 (DT)
Width declared	96.0 in · 2,438 mm	88.2 in · 2,240 mm	+9% 5230 (DT)
Height declared	106.1 in · 2,695 mm	105.5 in · 2,680 mm	—
Ground clearance declared	22.1 in · 561 mm	16.3 in · 415 mm	+35% 5230 (DT)
Turning radius, braked declared	13.5 ft · 4.13 m	13.4 ft · 4.07 m	—
Fuel tank declared	179.6 qt · 170.0 L	147.9 qt · 140.0 L	+21% 5230 (DT)

Source

Source