Case-IH 5150 Maxxum vs Massey Ferguson MF 3125 (A)

9 material differences · fewer than 12

Tractor one

1992–1997

No measured PTO figure

Tractor two

1990–1995

No measured PTO figure

Which should you choose?

Read our verdict on the 5150 Maxxum and the MF 3125 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 9 fields identical or within 5%, which is not counted as material

Case-IH 5150 Maxxum and Massey Ferguson MF 3125 (A), field by field
Field	5150 Maxxum	MF 3125 (A)	Gap
Engine
Engine power, claimed claimed	123.2 hp	124.3 hp	—
Engine declared	CUMMINS NCE 6 T-590	Perkins 1006-6 T 7	differs
Displacement declared	5.88 L	5.99 L	—
Maximum torque declared	369 lb·ft · 500 N·m	352 lb·ft · 477 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	running in oil bath multi-plate clutch	Pedal-operated, dry and air-cooled VALEO single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	19.8 gpm · 75.0 L/min	13.3 gpm · 50.3 L/min	+49% 5150 Maxxum
Pressure declared	3,191 psi · 220 bar	2,277–2,350 psi · 157–162 bar	differs
Three-point lift at ends declared	10,141 lb · 4,600 kg	11,861 lb · 5,380 kg	+17% MF 3125 (A)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,817 lb · 5,360 kg	10,593 lb · 4,805 kg	+12% 5150 Maxxum
Maximum permissible mass declared	17,196 lb · 7,800 kg	18,739 lb · 8,500 kg	+9% MF 3125 (A)
Wheelbase declared	101.8 in · 2,585 mm	106.1 in · 2,696 mm	—
Length declared	175.3 in · 4,453 mm	178.2 in · 4,527 mm	—
Width declared	86.8 in · 2,204 mm	76.5 in · 1,943 mm	+13% 5150 Maxxum
Height declared	108.9 in · 2,765 mm	113.0 in · 2,869 mm	—
Ground clearance declared	17.0 in · 431 mm	16.9 in · 428 mm	—
Turning radius, braked declared	14.8 ft · 4.50 m	—	—
Fuel tank declared	179.6 qt · 170.0 L	232.5 qt · 220 L	+29% MF 3125 (A)

Source

Source