Case-IH 5120 Maxxum vs VALMET 6300-4

9 material differences · fewer than 12

Tractor one

1989–1997

No measured PTO figure

Tractor two

1991–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 5120 Maxxum and the 6300-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Case-IH 5120 Maxxum and VALMET 6300-4, field by field
Field	5120 Maxxum	6300-4	Gap
Engine
Engine power, claimed claimed	88.8 hp	83.8 hp	+6% 5120 Maxxum
Engine declared	CUMMINS NCE 4 TA-390 or NCE 4 T-390	VALMET 420 DS/420 DSRE/44 DT	differs
Displacement declared	3.92 L	4.40 L	+12% 6300-4
Maximum torque declared	243 lb·ft · 330 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Case-Poclain multi-disc clutch running in an oil bath	—	—
Hydraulics & hitch
Pump flow declared	19.8 gpm · 75.0 L/min	18.4 gpm · 69.5 L/min	+8% 5120 Maxxum
Pressure declared	3,191 psi · 220 bar	—	—
Three-point lift at ends declared	9,555 lb · 4,334 kg	9,601 lb · 4,355 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,718 lb · 5,315 kg	8,973 lb · 4,070 kg	+31% 5120 Maxxum
Maximum permissible mass declared	16,535 lb · 7,500 kg	14,330 lb · 6,500 kg	+15% 5120 Maxxum
Wheelbase declared	92.3 in · 2,345 mm	91.7 in · 2,330 mm	—
Length declared	165.9 in · 4,213 mm	174.2 in · 4,425 mm	—
Width declared	86.8 in · 2,204 mm	79.1 in · 2,010 mm	+10% 5120 Maxxum
Height declared	106.1 in · 2,695 mm	106.9 in · 2,715 mm	—
Ground clearance declared	18.4 in · 467 mm	17.1 in · 435 mm	+7% 5120 Maxxum
Turning radius, braked declared	13.2 ft · 4.01 m	15.3 ft · 4.65 m	+16% 6300-4
Fuel tank declared	142.7 qt · 135.0 L	167.0 qt · 158.0 L	+17% 6300-4

Source

Source