Case-IH 385 (DT) vs SAME 45 DT

13 material differences

Tractor one

1985–1990

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 385 (DT) and the 45 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH 385 (DT) and SAME 45 DT, field by field
Field	385 (DT)	45 DT	Gap
Engine
Engine power, claimed claimed	45.3 hp	41.4 hp	+9% 385 (DT)
Engine declared	IHC D-155	MITSUBISHI K 4 F-DT	differs
Displacement declared	2.54 L	1.49 L	+70% 385 (DT)
Maximum torque declared	100 lb·ft · 135 N·m	74 lb·ft · 100.2 N·m	+35% 385 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 385 (DT)
Clutch declared	Pedal-operated dry Laycock single-plate drive clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	7.9 gpm · 30.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	2,646 lb · 1,200 kg	+30% 385 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,692 lb · 2,582 kg	2,227 lb · 1,010 kg	+156% 385 (DT)
Maximum permissible mass declared	—	5,291 lb · 2,400 kg	—
Wheelbase declared	79.0 in · 2,007 mm	66.9 in · 1,700 mm	+18% 385 (DT)
Length declared	139.2 in · 3,535 mm	119.3 in · 3,030 mm	+17% 385 (DT)
Width declared	72.4 in · 1,840 mm	49.4 in · 1,255 mm	+47% 385 (DT)
Height declared	93.7 in · 2,380 mm	84.8 in · 2,155 mm	+10% 385 (DT)
Ground clearance declared	8.5 in · 215 mm	15.0 in · 380 mm	+77% 45 DT
Turning radius, braked declared	—	10.8 ft · 3.30 m	—
Fuel tank declared	80.0 qt · 75.7 L	30.6 qt · 29.0 L	+161% 385 (DT)

Source

Source