Case-IH 385 (DT) vs New Holland 3235

11 material differences · fewer than 12

Tractor one

1985–1990

No measured PTO figure

Tractor two

1996–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 385 (DT) and the 3235 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 385 (DT) and New Holland 3235, field by field
Field	385 (DT)	3235	Gap
Engine
Engine power, claimed claimed	45.3 hp	38.5 hp	+18% 385 (DT)
Engine declared	IHC D-155	IVECO 8035.06	differs
Displacement declared	2.54 L	2.71 L	+7% 3235
Maximum torque declared	100 lb·ft · 135 N·m	99 lb·ft · 134 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Laycock single-plate drive clutch	Dry OMG or LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	9.2 gpm · 35.0 L/min	—
Pressure declared	—	3,263 psi · 225 bar	—
Three-point lift at ends declared	3,439 lb · 1,560 kg	3,726 lb · 1,690 kg	+8% 3235
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,692 lb · 2,582 kg	3,792 lb · 1,720 kg	+50% 385 (DT)
Wheelbase declared	79.0 in · 2,007 mm	78.7 in · 1,999 mm	—
Length declared	139.2 in · 3,535 mm	128.0 in · 3,250 mm	+9% 385 (DT)
Width declared	72.4 in · 1,840 mm	64.6 in · 1,640 mm	+12% 385 (DT)
Height declared	93.7 in · 2,380 mm	95.3 in · 2,420 mm	—
Ground clearance declared	8.5 in · 215 mm	14.8 in · 375 mm	+74% 3235
Turning radius, braked declared	—	10.1 ft · 3.07 m	—
Fuel tank declared	80.0 qt · 75.7 L	44.4 qt · 42.0 L	+80% 385 (DT)

Source

Source