Case-IH 385 (DT) vs Leyland 245
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 385 (DT) and the 245 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 385 (DT) | 245 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 45.3 hp | 46.8 hp | — |
| Engine declared | IHC D-155 | Perkins D 3152 | differs |
| Displacement declared | 2.54 L | 2.50 L | — |
| Maximum torque declared | 100 lb·ft · 135 N·m | 128 lb·ft · 173 N·m | +28% 245 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 16.2 mph · 26 km/h | +15% 385 (DT) |
| Clutch declared | Pedal-operated dry Laycock single-plate drive clutch | Dry Borg & Beck double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.0 gpm · 30.2 L/min | — |
| Three-point lift at ends declared | 3,439 lb · 1,560 kg | 3,748 lb · 1,700 kg | +9% 245 |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,692 lb · 2,582 kg | 5,236 lb · 2,375 kg | +9% 385 (DT) |
| Wheelbase declared | 79.0 in · 2,007 mm | 74.4 in · 1,890 mm | +6% 385 (DT) |
| Length declared | 139.2 in · 3,535 mm | 126.0 in · 3,200 mm | +10% 385 (DT) |
| Width declared | 72.4 in · 1,840 mm | 63.8 in · 1,621 mm | +14% 385 (DT) |
| Height declared | 93.7 in · 2,380 mm | 90.6 in · 2,301 mm | — |
| Ground clearance declared | 8.5 in · 215 mm | 15.7 in · 399 mm | +86% 245 |
| Turning radius, braked declared | — | 10.1 ft · 3.07 m | — |
| Fuel tank declared | 80.0 qt · 75.7 L | — | — |
Case-IH 385 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 385”
- Source: Traktorenlexikon, “Case-IH 3210”
Leyland 245 sources
Source
- Source: Traktorenlexikon, “Leyland 245”
- Source: Traktorenlexikon, “Lindner BF 420 SN/SA”