8 material differences · fewer than 12

Tractor oneCase-IH 385 (DT)1985–1990No measured PTO figureTractor twoDeutz-Fahr DX 3.101984–1990No measured PTO figure

Which should you choose?

Read our verdict on the 385 (DT) and the DX 3.10 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH 385 (DT) and Deutz-Fahr DX 3.10, field by field
Field	385 (DT)	DX 3.10	Gap
Engine
Engine power, claimed claimed	45.3 hp	46 hp	—
Engine declared	IHC D-155	KHD F3L 912	differs
Displacement declared	2.54 L	2.83 L	+11% DX 3.10
Maximum torque declared	100 lb·ft · 135 N·m	123 lb·ft · 167 N·m	+24% DX 3.10
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated dry Laycock single-plate drive clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	9.1 gpm · 34.4 L/min	—
Pressure declared	—	3,481 psi · 240 bar	—
Three-point lift, at the coupling points declared	3,439 lb · 1,560 kg	4,189 lb · 1,900 kg	+22% DX 3.10
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,692 lb · 2,582 kg	5,600 lb · 2,540 kg	—
Maximum permissible mass declared	—	8,818 lb · 4,000 kg	—
Wheelbase declared	79.0 in · 2,007 mm	79.2 in · 2,012 mm	—
Length declared	139.2 in · 3,535 mm	137.4 in · 3,490 mm	—
Width declared	72.4–90.6 in · 1,840–2,300 mm	70.4 in · 1,788 mm	differs
Height, over the cab declared	93.7 in · 2,380 mm	91.1 in · 2,315 mm	—
Ground clearance declared	8.5 in · 215 mm	16.1 in · 410 mm	+91% DX 3.10
Fuel tank declared	80.0 qt · 75.7 L	87.7 qt · 83 L	+10% DX 3.10

Source

Source