Case-IH 3210 vs SAME 45 DT

14 material differences

Tractor one

1993–1998

No measured PTO figure

Tractor two

1992–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 3210 and the 45 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

14 material differences · 1 fields identical or within 5%, which is not counted as material

Case-IH 3210 and SAME 45 DT, field by field
Field	3210	45 DT	Gap
Engine
Engine power, claimed claimed	44.4 hp	41.4 hp	+7% 3210
Engine declared	IHC D-155	MITSUBISHI K 4 F-DT	differs
Displacement declared	2.54 L	1.49 L	+70% 3210
Maximum torque declared	117 lb·ft · 159 N·m	74 lb·ft · 100.2 N·m	+59% 3210
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 3210
Clutch declared	pedal-operated dry Laycock single-disc clutch	Pedal operated dry single plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	7.9 gpm · 30.0 L/min	—
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,401 lb · 2,450 kg	2,646 lb · 1,200 kg	+104% 3210
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,997 lb · 2,720 kg	2,227 lb · 1,010 kg	+169% 3210
Maximum permissible mass declared	—	5,291 lb · 2,400 kg	—
Wheelbase declared	79.0 in · 2,007 mm	66.9 in · 1,700 mm	+18% 3210
Length declared	139.2 in · 3,535 mm	119.3 in · 3,030 mm	+17% 3210
Width declared	72.4 in · 1,840 mm	49.4 in · 1,255 mm	+47% 3210
Height declared	93.5 in · 2,376 mm	84.8 in · 2,155 mm	+10% 3210
Ground clearance declared	8.5 in · 215 mm	15.0 in · 380 mm	+77% 45 DT
Turning radius, braked declared	11.5 ft · 3.50 m	10.8 ft · 3.30 m	+6% 3210
Fuel tank declared	118.3 qt · 112.0 L	30.6 qt · 29.0 L	+286% 3210

Source

Source