Case-IH 3210 vs Hürlimann Prince 445 DT
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3210 and the Prince 445 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 3210 | Prince 445 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 41.4 hp | +7% 3210 |
| Engine declared | IHC D-155 | MITSUBISHI K4 F-D Turbo | differs |
| Displacement declared | 2.54 L | 1.49 L | +70% 3210 |
| Maximum torque declared | 117 lb·ft · 159 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | pedal-operated dry Laycock single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 1.8 gpm · 7.0 L/min | — |
| Three-point lift at ends declared | 5,401 lb · 2,450 kg | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,997 lb · 2,720 kg | 2,734 lb · 1,240 kg | +119% 3210 |
| Wheelbase declared | 79.0 in · 2,007 mm | 66.9 in · 1,700 mm | +18% 3210 |
| Length declared | 139.2 in · 3,535 mm | 119.3 in · 3,030 mm | +17% 3210 |
| Width declared | 72.4 in · 1,840 mm | 49.6 in · 1,260 mm | +46% 3210 |
| Height declared | 93.5 in · 2,376 mm | 79.9 in · 2,030 mm | +17% 3210 |
| Ground clearance declared | 8.5 in · 215 mm | 15.4 in · 390 mm | +81% Prince 445 DT |
| Turning radius, braked declared | 11.5 ft · 3.50 m | 10.8 ft · 3.30 m | +6% 3210 |
| Fuel tank declared | 118.3 qt · 112.0 L | 30.6 qt · 29.0 L | +286% 3210 |
Case-IH 3210 sources
Source
- Source: Traktorenlexikon, “Case-IH 3210”
Hürlimann Prince 445 DT sources
Source
- Source: Traktorenlexikon, “Hürlimann Prince 445”