Case-IH 3210 or Hürlimann Prince 445 DT?
Which should you choose?
On performance, no comparable figure differs by more than its threshold: on this data the machines are level.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 3210 | Prince 445 DT | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 25.9 kW (34.7 hp)Traktorenlexikon, “Case-IH 3210” | 26.1 kW (35.0 hp)Traktorenlexikon, “Hürlimann Prince 445” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 3210 and the Prince 445 DT. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 3210 and the Prince 445 DT. |
| Which pumps more oil for implements? | — | 7.0 L/min (1.8 gpm)Traktorenlexikon, “Hürlimann Prince 445” | No figureNo call on hydraulic flow: no figure on record for the 3210. |
| Which lifts more on the three-point hitch? | 2,450 kg (5,401 lb)Traktorenlexikon, “Case-IH 3210” | — | No figureNo call on three-point lift: no figure on record for the Prince 445 DT. |
| Which is heavier, for traction? | 2,720 kg (5,997 lb)Traktorenlexikon, “Case-IH 3210” | 1,240 kg (2,734 lb)Traktorenlexikon, “Hürlimann Prince 445” | Ahead (a fact, not an advantage)The Case-IH 3210 is 119% heavier (1,480 kg / 3,263 lb) than the Hürlimann Prince 445 DT (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the 3210 and the Prince 445 DT. |
| Which has the wider choice of gears? | 8 to 16Traktorenlexikon, “Case-IH 3210” | 12Traktorenlexikon, “Hürlimann Prince 445” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 3210 and the Prince 445 DT. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Case-IH 3210” | 30 km/h (18.6 mph)Traktorenlexikon, “Hürlimann Prince 445” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Case-IH 3210” | 540/1000 rpmTraktorenlexikon, “Hürlimann Prince 445” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Case-IH 3210” | — | No figureNo call on PTO independence: not stated for the Prince 445 DT. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Case-IH 3210” | 4WDTraktorenlexikon, “Hürlimann Prince 445” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1998 | 1995–1999 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Case-IH 3210 is 119% heavier (1,480 kg / 3,263 lb) than the Hürlimann Prince 445 DT (both unladen weight, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources