7 material differences · fewer than 12

Tractor oneBOLINDER-MUNKTELL BM-551953–1959No measured PTO figureTractor twoLanz D 90061943–1945No measured PTO figure

Which should you choose?

Read our verdict on the BM-55 and the D 9006 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

7 material differences · 0 fields identical or within 5%, which is not counted as material

BOLINDER-MUNKTELL BM-55 and Lanz D 9006, field by field
FieldBM-55D 9006Gap
Engine
Engine power, claimed claimed56.2 hp39.3 hp+43% BM-55
Engine declaredBOLINDER-MUNKTELL 1054——
Displacement declared4.48 L——
Maximum torque declared195 lb·ft · 265 N·m——
Transmission
Top speed declared18.6 mph · 30 km/h11.6 mph · 18.6 km/h+61% BM-55
Clutch declaredPedal-operated dry single-plate clutch——
Hydraulics & hitch
Pump flow declared7.1 gpm · 26.8 L/min——
Pressure declared1,276 psi · 88 bar——
Rear PTO speeds declared540 rpm630differs
Weight & dimensions
Unladen weight declared7,145 lb · 3,241 kg7,716 lb · 3,500 kg+8% D 9006
Wheelbase declared85.6 in · 2,175 mm77.8 in · 1,977 mm+10% BM-55
Length declared135.8 in · 3,450 mm151.8 in · 3,855 mm+12% D 9006
Width declared74.8 in · 1,900 mm70.6 in · 1,792 mm+6% BM-55
Ground clearance declared16.9 in · 430 mm11.8 in · 300 mm+43% BM-55
Fuel tank declared116.2 qt · 110.0 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

BOLINDER-MUNKTELL BM-55 sources

Source
  • Source: Traktorenlexikon, “Bolinder-Munktell BM 55”

Lanz D 9006 sources

Source
  • Source: Traktorenlexikon, “Lanz D 9006 Reingas”