13 material differences
Tractor oneBOLINDER-MUNKTELL 425 Terrier1957–1962No measured PTO figureTractor twoKramer KA 171956No measured PTO figure
Which should you choose?
Read our verdict on the 425 Terrier and the KA 17 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 0 fields identical or within 5%, which is not counted as material
| Field | 425 Terrier | KA 17 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31.5 hp | 17.7 hp | +78% 425 Terrier |
| Engine declared | AB-VOLVO B 16 C | Güldner 2 DN | differs |
| Displacement declared | 1.58 L | 1.30 L | +21% 425 Terrier |
| Maximum torque declared | 72 lb·ft · 97 N·m | 50 lb·ft · 68 N·m | +43% 425 Terrier |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 11.8 mph · 19 km/h | +58% 425 Terrier |
| Clutch declared | Pedal operated dry single-plate clutch | Single-plate dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.3 gpm · 23.8 L/min | 3.7 gpm · 14.0 L/min | +70% 425 Terrier |
| Pressure declared | — | 1,707 psi · 118 bar | — |
| Rear PTO speeds declared | 540 rpm | 530 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,175 lb · 1,440 kg | 2,701 lb · 1,225 kg | +18% 425 Terrier |
| Wheelbase declared | 75.4 in · 1,915 mm | 67.9 in · 1,725 mm | +11% 425 Terrier |
| Length declared | 116.9 in · 2,970 mm | 105.5 in · 2,680 mm | +11% 425 Terrier |
| Width declared | 66.9 in · 1,700 mm | 57.9 in · 1,470 mm | +16% 425 Terrier |
| Ground clearance declared | 17.7 in · 450 mm | 11.8 in · 300 mm | +50% 425 Terrier |
| Turning radius, braked declared | 9.8 ft · 3.00 m | — | — |
| Fuel tank declared | 42.3 qt · 40.0 L | 25.4 qt · 24 L | +67% 425 Terrier |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
BOLINDER-MUNKTELL 425 Terrier sources
Source
- Source: Traktorenlexikon, “Bolinder-Munktell BM 425 Terrier”
Kramer KA 17 sources
Source
- Source: Traktorenlexikon, “Kramer KA 17”
- Source: Traktorenlexikon, “MAN AS 718 A”