BOLINDER-MUNKTELL 425 Terrier vs Fahr D 17 NH

13 material differences

Tractor one

1957–1962

No measured PTO figure

Tractor two

1953–1955

No measured PTO figure

Which should you choose?

Read our verdict on the 425 Terrier and the D 17 NH → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

BOLINDER-MUNKTELL 425 Terrier and Fahr D 17 NH, field by field
Field	425 Terrier	D 17 NH	Gap
Engine
Engine power, claimed claimed	31.5 hp	16.8 hp	+88% 425 Terrier
Engine declared	AB-VOLVO B 16 C	Güldner 2 DN	differs
Displacement declared	1.58 L	1.30 L	+21% 425 Terrier
Maximum torque declared	72 lb·ft · 97 N·m	51 lb·ft · 69 N·m	+41% 425 Terrier
Transmission
Top speed declared	18.6 mph · 30 km/h	12.4 mph · 20 km/h	+50% 425 Terrier
Clutch declared	Pedal operated dry single-plate clutch	Pedal operated dry Fichtel & Sachs single disc clutch	differs
Hydraulics & hitch
Pump flow declared	6.3 gpm · 23.8 L/min	—	—
Pressure declared	—	3,129 psi · 216 bar	—
Three-point lift at ends declared	1,764 lb · 800 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,175 lb · 1,440 kg	2,932 lb · 1,330 kg	+8% 425 Terrier
Maximum permissible mass declared	—	4,409 lb · 2,000 kg	—
Wheelbase declared	75.4 in · 1,915 mm	64.6 in · 1,640 mm	+17% 425 Terrier
Length declared	116.9 in · 2,970 mm	104.3 in · 2,650 mm	+12% 425 Terrier
Width declared	66.9 in · 1,700 mm	61.5 in · 1,562 mm	+9% 425 Terrier
Height declared	77.2 in · 1,960 mm	62.0 in · 1,576 mm	+24% 425 Terrier
Ground clearance declared	17.7 in · 450 mm	20.1 in · 510 mm	+13% D 17 NH
Turning radius, braked declared	9.8 ft · 3.00 m	8.0 ft · 2.45 m	+22% 425 Terrier
Fuel tank declared	42.3 qt · 40.0 L	26.4 qt · 25 L	+60% 425 Terrier

Source

Source