AGRIFULL 80-50 (DT) vs Case-Steyr M 948 (a)

15 material differences

Tractor one

1981–1986

No measured PTO figure

Tractor two

1996–2001

No measured PTO figure

Which should you choose?

Read our verdict on the 80-50 (DT) and the M 948 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

AGRIFULL 80-50 (DT) and Case-Steyr M 948 (a), field by field
Field	80-50 (DT)	M 948 (a)	Gap
Engine
Engine power, claimed claimed	47.3 hp	47.3 hp	—
Engine declared	FIAT 8035.00	PERKINS 903-27	differs
Displacement declared	2.34 L	2.70 L	+15% M 948 (a)
Maximum torque declared	110 lb·ft · 149 N·m	155 lb·ft · 210 N·m	+41% M 948 (a)
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	dry VALEO or LuK double clutch type 11/11 inches	Dry Carraro double clutch	differs
Hydraulics & hitch
Pump flow declared	5.8 gpm · 22.0 L/min	8.1 gpm · 30.8 L/min	+40% M 948 (a)
Pressure declared	3,118 psi · 215 bar	3,481 psi · 240 bar	+12% M 948 (a)
Three-point lift at ends declared	2,978 lb · 1,351 kg	4,894 lb · 2,220 kg	+64% M 948 (a)
Rear PTO speeds declared	540 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	3,946 lb · 1,790 kg	5,203 lb · 2,360 kg	+32% M 948 (a)
Maximum permissible mass declared	—	9,259 lb · 4,200 kg	—
Wheelbase declared	77.6 in · 1,970 mm	83.3 in · 2,117 mm	+7% M 948 (a)
Length declared	141.7 in · 3,600 mm	139.0 in · 3,530 mm	—
Width declared	63.0 in · 1,600 mm	74.4 in · 1,890 mm	+18% M 948 (a)
Height declared	49.8 in · 1,265 mm	91.7 in · 2,330 mm	+84% M 948 (a)
Ground clearance declared	15.0 in · 380 mm	16.1 in · 410 mm	+8% M 948 (a)
Fuel tank declared	52.8 qt · 50.0 L	77.1 qt · 73.0 L	+46% M 948 (a)

Source

Source