Agco RT 180 A vs Fendt 924 Vario

9 material differences · fewer than 12

Tractor one

2009–2011

No measured PTO figure

Tractor two

2006–2014

No measured PTO figure

Which should you choose?

Read our verdict on the RT 180 A and the 924 Vario → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Agco RT 180 A and Fendt 924 Vario, field by field
Field	RT 180 A	924 Vario	Gap
Engine
Engine power, claimed claimed	209.1 hp	207 hp	—
Engine declared	SISU-DIESEL 74 CTA-4V	Deutz TCD 2013 LO6 4V	differs
Displacement declared	7.37 L	7.14 L	—
Maximum torque declared	652 lb·ft · 884 N·m	738 lb·ft · 1,000 N·m	+13% 924 Vario
Transmission
Top speed declared	24.9 mph · 40 km/h	31.1–37.3 mph · 50–60 km/h	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	30.8 gpm · 116.6 L/min	—	—
Pressure declared	3,336 psi · 230 bar	—	—
Three-point lift at ends declared	14,546 lb · 6,598 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	17,461 lb · 7,920 kg	22,223 lb · 10,080 kg	+27% 924 Vario
Maximum permissible mass declared	—	33,069–39,683 lb · 15,000–18,000 kg	—
Wheelbase declared	118.0 in · 2,996 mm	120.1 in · 3,050 mm	—
Length declared	210.0 in · 5,334 mm	222.6 in · 5,655 mm	+6% 924 Vario
Width declared	79.1 in · 2,009 mm	108.3 in · 2,750 mm	+37% 924 Vario
Height declared	122.0 in · 3,099 mm	130.8 in · 3,322 mm	+7% 924 Vario
Ground clearance declared	22.4 in · 570 mm	18.9 in · 480 mm	+19% RT 180 A
Turning radius, braked declared	—	19.9 ft · 6.08 m	—
Fuel tank declared	399.4 qt · 378.0 L	697.4 qt · 660 L	+75% 924 Vario

Source

Source