Agco RT-120 A vs Case-IH CS 150

9 material differences · fewer than 12

Tractor one

2006–2011

No measured PTO figure

Tractor two

1997–2003

No measured PTO figure

Which should you choose?

Read our verdict on the RT-120 A and the CS 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Agco RT-120 A and Case-IH CS 150, field by field
Field	RT-120 A	CS 150	Gap
Engine
Engine power, claimed claimed	141.1 hp	143.0 hp	—
Engine declared	SISU-DIESEL 66 CTA-4V	SISU 620.83	differs
Displacement declared	6.60 L	6.60 L	—
Maximum torque declared	479 lb·ft · 649 N·m	410 lb·ft · 556 N·m	+17% RT-120 A
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9 mph · 40 km/h	—
Clutch declared	Pedal operated electrohydraulic VALEO multi-plate clutch	Transmission integrated, wet CASE-IH multi-disc clutch, designed as drive clutch	differs
Hydraulics & hitch
Pump flow declared	27.2 gpm · 102.8 L/min	32.7 gpm · 123.8 L/min	+20% CS 150
Pressure declared	3,336 psi · 230 bar	3,408 psi · 235 bar	—
Three-point lift at ends declared	—	19,467 lb · 8,830 kg	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	13,300 lb · 6,033 kg	13,250 lb · 6,010 kg	—
Maximum permissible mass declared	—	20,944 lb · 9,500 kg	—
Wheelbase declared	111.3 in · 2,827 mm	110.5 in · 2,806 mm	—
Length declared	183.3 in · 4,656 mm	194.1 in · 4,930 mm	+6% CS 150
Width declared	79.3 in · 2,014 mm	99.0 in · 2,515 mm	+25% CS 150
Height declared	116.2 in · 2,951 mm	114.6 in · 2,910 mm	—
Ground clearance declared	16.9 in · 430 mm	21.3 in · 540 mm	+26% CS 150
Fuel tank declared	412.1 qt · 390.0 L	232.5–317.0 qt · 220.0–300.0 L	differs

Source

Source