Agco GT-45 vs VALMET 255 (255-4)

10 material differences · fewer than 12

Tractor one

2004–2007

No measured PTO figure

Tractor two

1992–1994

No measured PTO figure

Which should you choose?

Read our verdict on the GT-45 and the 255 (255-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Agco GT-45 and VALMET 255 (255-4), field by field
Field	GT-45	255 (255-4)	Gap
Engine
Engine power, claimed claimed	51.2 hp	52 hp	—
Engine declared	SAME-DEUTZ-FAHR 1000.3	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 255 (255-4)
Maximum torque declared	151 lb·ft · 205 N·m	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry single-disc clutch	Pedal operated dry Fichtel & Sachs single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	Open centre	—
Pump flow declared	22.7 gpm · 85.9 L/min	10.3 gpm · 39.0 L/min	+120% GT-45
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	—	5,688 lb · 2,580 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,333 lb · 2,419 kg	6,217 lb · 2,820 kg	+17% 255 (255-4)
Wheelbase declared	82.9 in · 2,105 mm	83.1 in · 2,112 mm	—
Length declared	145.7 in · 3,701 mm	146.1 in · 3,710 mm	—
Width declared	70.4 in · 1,788 mm	77.4 in · 1,965 mm	+10% 255 (255-4)
Height declared	103.6 in · 2,631 mm	96.9 in · 2,460 mm	+7% GT-45
Ground clearance declared	17.5 in · 445 mm	15.9 in · 405 mm	+10% GT-45
Turning radius, braked declared	10.0 ft · 3.06 m	10.2 ft · 3.10 m	—
Fuel tank declared	94.8 qt · 89.7 L	77.1 qt · 73.0 L	+23% GT-45

Source

Source