Agco DT-220 A vs John Deere 8320 T

9 material differences · fewer than 12

Tractor one

2005–2008

No measured PTO figure

Tractor two

2002–2005

No measured PTO figure

Which should you choose?

Read our verdict on the DT-220 A and the 8320 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 8 fields identical or within 5%, which is not counted as material

Agco DT-220 A and John Deere 8320 T, field by field
Field	DT-220 A	8320 T	Gap
Engine
Engine power, claimed claimed	256.4 hp	247 hp	—
Engine declared	SISU-DIESEL 84 ETA	John Deere-PowerTech 6.081 HRW-25	differs
Displacement declared	8.42 L	8.13 L	—
Maximum torque declared	763 lb·ft · 1,035 N·m	780 lb·ft · 1,058 N·m	—
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	pedal-operated hydraulic wet John Deere multi-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	Load sensing	Load sensing	—
Pump flow declared	36.9 gpm · 139.8 L/min	34.6 gpm · 131.0 L/min	+7% DT-220 A
Pressure declared	—	2,944 psi · 203 bar	—
Three-point lift at ends declared	14,648 lb · 6,644 kg	16,535 lb · 7,500 kg	+13% 8320 T
Rear PTO speeds declared	540/1000/540E rpm	1000 rpm	differs
Weight & dimensions
Unladen weight declared	20,371 lb · 9,240 kg	26,735 lb · 12,127 kg	+31% 8320 T
Maximum permissible mass declared	30,865 lb · 14,000 kg	31,500 lb · 14,288 kg	—
Wheelbase declared	121.1 in · 3,075 mm	89.0 in · 2,260 mm	+36% DT-220 A
Length declared	209.4 in · 5,320 mm	217.7 in · 5,530 mm	—
Width declared	100.4 in · 2,550 mm	103.7 in · 2,634 mm	—
Height declared	125.2 in · 3,180 mm	122.9 in · 3,122 mm	—
Ground clearance declared	19.7 in · 500 mm	13.8 in · 350 mm	+43% DT-220 A
Fuel tank declared	697.4 qt · 660.0 L	519.9 qt · 492.0 L	+34% DT-220 A

Source

Source