10 material differences · fewer than 12

Tractor oneAGCO-ALLIS 91901991–1992No measured PTO figureTractor twoJohn Deere 8110 T2000–2002No measured PTO figure

Which should you choose?

Read our verdict on the 9190 and the 8110 T → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9190 and John Deere 8110 T, field by field
Field	9190	8110 T	Gap
Engine
Engine power, claimed claimed	193.4 hp	192.4 hp	—
Engine declared	K.H.D. BF6L 513 R-T	John Deere-PowerTech 6.081 HRW	differs
Displacement declared	9.57 L	8.13 L	+18% 9190
Maximum torque declared	—	586 lb·ft · 794 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	—	Pedal operated hydraulic wet John Deere multi-plate clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	28.0 gpm · 105.9 L/min	31.8 gpm · 120.4 L/min	+14% 8110 T
Pressure declared	3,771 psi · 260 bar	3,379 psi · 233 bar	+12% 9190
Rear PTO speeds declared	1000 rpm	1000 rpm	—
Weight & dimensions
Unladen weight declared	16,601 lb · 7,530 kg	23,649 lb · 10,727 kg	+42% 8110 T
Maximum permissible mass declared	—	31,500 lb · 14,288 kg	—
Wheelbase declared	115.0 in · 2,921 mm	89.0 in · 2,260 mm	+29% 9190
Length declared	200.0 in · 5,080 mm	216.0 in · 5,487 mm	+8% 8110 T
Width declared	96.0 in · 2,438 mm	134.0–136.0 in · 3,404–3,454 mm	differs
Height, over the cab declared	122.0 in · 3,099 mm	123.4 in · 3,135 mm	—
Ground clearance declared	22.0 in · 559 mm	14.2 in · 360 mm	+55% 9190
Turning radius, braked declared	16.6 ft · 5.05 m	—	—
Fuel tank declared	367.7 qt · 348.0 L	519.9 qt · 492.0 L	+41% 8110 T

Source

Source