AGCO-ALLIS 9190 vs Hürlimann SX 2000

8 material differences · fewer than 12

Tractor one

1991–1992

No measured PTO figure

Tractor two

2000–2004

No measured PTO figure

Which should you choose?

Read our verdict on the 9190 and the SX 2000 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 6 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9190 and Hürlimann SX 2000, field by field
Field	9190	SX 2000	Gap
Engine
Engine power, claimed claimed	193.4 hp	192.3 hp	—
Engine declared	K.H.D. BF6L 513 R-T	SAME-DEUTZ-FAHR 1000.6 WTI-3V	differs
Displacement declared	9.57 L	6.00 L	+60% 9190
Maximum torque declared	—	575 lb·ft · 780 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	24.9 mph · 40 km/h	+33% SX 2000
Clutch declared	—	Hydraulically operated wet multi-disc clutch	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	28.0 gpm · 105.9 L/min	—	—
Pressure declared	3,771 psi · 260 bar	2,176 psi · 150 bar	+73% 9190
Three-point lift at ends declared	7,965 lb · 3,613 kg	22,046 lb · 10,000 kg	+177% SX 2000
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	16,601 lb · 7,530 kg	15,873 lb · 7,200 kg	—
Wheelbase declared	115.0 in · 2,921 mm	112.2 in · 2,850 mm	—
Length declared	200.0 in · 5,080 mm	191.4 in · 4,861 mm	—
Width declared	96.0 in · 2,438 mm	95.5 in · 2,426 mm	—
Height declared	122.0 in · 3,099 mm	116.9 in · 2,970 mm	—
Ground clearance declared	22.0 in · 559 mm	23.4 in · 594 mm	+6% SX 2000
Turning radius, braked declared	16.6 ft · 5.05 m	—	—
Fuel tank declared	367.7 qt · 348.0 L	422.7 qt · 400.0 L	+15% SX 2000

Source

Source