AGCO-ALLIS 7650 vs Massey Ferguson MF 2725

12 material differences

Tractor one

1991–1994

No measured PTO figure

Tractor two

1985–1987

No measured PTO figure

Which should you choose?

Read our verdict on the 7650 and the MF 2725 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 5 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 7650 and Massey Ferguson MF 2725, field by field
Field	7650	MF 2725	Gap
Engine
Engine power, claimed claimed	147.0 hp	145.1 hp	—
Engine declared	S.L.H. 1056 PS	Perkins AT 6.354-4 CC	differs
Displacement declared	6.24 L	5.80 L	+8% 7650
Maximum torque declared	359 lb·ft · 487 N·m	364 lb·ft · 493 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	21.7 mph · 35 km/h	+17% MF 2725
Clutch declared	Pedal-operated dry S.L.H. double clutch	Pedal-operated, dry and air-cooled single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Hydraulic control declared	Load sensing	—	—
Pressure declared	3,046 psi · 210 bar	—	—
Three-point lift at ends declared	9,720 lb · 4,409 kg	15,917 lb · 7,220 kg	+64% MF 2725
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	12,566 lb · 5,700 kg	13,448 lb · 6,100 kg	+7% MF 2725
Maximum permissible mass declared	18,739 lb · 8,500 kg	16,535 lb · 7,500 kg	+13% 7650
Wheelbase declared	114.2 in · 2,901 mm	107.3 in · 2,726 mm	+6% 7650
Length declared	185.2 in · 4,704 mm	200.0 in · 5,080 mm	+8% MF 2725
Width declared	86.0 in · 2,184 mm	95.3 in · 2,420 mm	+11% MF 2725
Height declared	116.8 in · 2,967 mm	116.5 in · 2,960 mm	—
Ground clearance declared	20.4 in · 518 mm	19.3 in · 490 mm	+6% 7650
Turning radius, braked declared	17.2 ft · 5.25 m	16.1 ft · 4.90 m	+7% 7650
Fuel tank declared	221.9 qt · 210.0 L	225.1 qt · 213.0 L	—

Source

Source