AGCO-ALLIS 7650 or Massey Ferguson MF 2725?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 7650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson MF 2725 suits loader and hydraulic implement work better on this data: 64% (2,811 kg / 6,197 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for AGCO-ALLIS 7650 and Massey Ferguson MF 2725, with the call on each
Question7650MF 2725Call
Which puts more power through the PTO shaft?109.6 kW (147.0 hp)Traktorenlexikon, “AGCO-Allis 7650”108.2 kW (145.1 hp)Traktorenlexikon, “Massey Ferguson MF 2725”Not comparableNot comparable on power at the PTO shaft: the 7650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the 7650 and the MF 2725.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the 7650 and the MF 2725.
Which pumps more oil for implements?No figureNo call on hydraulic flow: no figure on record for the 7650 and the MF 2725.
Which lifts more on the three-point hitch?4,409 kg (9,720 lb)Traktorenlexikon, “AGCO-Allis 7650”7,220 kg (15,917 lb)Traktorenlexikon, “Massey Ferguson MF 2725”AheadThe Massey Ferguson MF 2725 has 64% more lift (2,811 kg / 6,197 lb) than the AGCO-ALLIS 7650 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?5,700 kg (12,566 lb)Traktorenlexikon, “AGCO-Allis 7650”6,100 kg (13,448 lb)Traktorenlexikon, “Massey Ferguson MF 2725”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?8,500 kg (18,739 lb)Traktorenlexikon, “AGCO-Allis 7650”7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 2725”AheadThe AGCO-ALLIS 7650 has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Massey Ferguson MF 2725 (both maximum permissible mass, as stated by the source).
Which has the wider choice of gears?24Traktorenlexikon, “AGCO-Allis 7650”16Traktorenlexikon, “Massey Ferguson MF 2725”AheadThe AGCO-ALLIS 7650 has 50% more forward gears (8 gears) than the Massey Ferguson MF 2725 (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the 7650 and the MF 2725.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “AGCO-Allis 7650”35 km/h (21.7 mph)Traktorenlexikon, “Massey Ferguson MF 2725”AheadThe Massey Ferguson MF 2725 has 17% more top speed (5.0 km/h / 3.1 mph) than the AGCO-ALLIS 7650 (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “AGCO-Allis 7650”540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 2725”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “AGCO-Allis 7650”independentTraktorenlexikon, “Massey Ferguson MF 2725”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “AGCO-Allis 7650”4WDTraktorenlexikon, “Massey Ferguson MF 2725”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1991–19941985–1987Ahead (a fact, not an advantage)The AGCO-ALLIS 7650 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 2725 has 64% more lift (2,811 kg / 6,197 lb) than the AGCO-ALLIS 7650 (both lift at the hitch ends, as stated by the source).
  • The AGCO-ALLIS 7650 has 13% higher maximum permissible mass (1,000 kg / 2,205 lb) than the Massey Ferguson MF 2725 (both maximum permissible mass, as stated by the source).
  • The AGCO-ALLIS 7650 has 50% more forward gears (8 gears) than the Massey Ferguson MF 2725 (both forward gears, as stated by the source).
  • The Massey Ferguson MF 2725 has 17% more top speed (5.0 km/h / 3.1 mph) than the AGCO-ALLIS 7650 (both top speed forward, as stated by the source).
  • The AGCO-ALLIS 7650 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the 7650 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the MF 2725 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.

← Every figure for both machines, side by side, with sources