12 material differences
Tractor oneAGCO-ALLIS 56501994–1999No measured PTO figureTractor twoVALMET 205/205-41989–1991No measured PTO figure
Which should you choose?
Read our verdict on the 5650 and the 205/205-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 5650 | 205/205-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 47.3 hp | 48 hp | — |
| Engine declared | S.L.H. 1000.3 A | VALMET D-27 D 2 | differs |
| Displacement declared | 3.00 L | 2.69 L | +12% 5650 |
| Maximum torque declared | 123 lb·ft · 167 N·m | 129 lb·ft · 175 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Dry SAME double clutch | Pedal operated dry Fichtel & Sachs single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 8.7 gpm · 33.0 L/min | 10.3 gpm · 39.0 L/min | +18% 205/205-4 |
| Pressure declared | 1,305 psi · 90 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,530 lb · 2,055 kg | 5,975 lb · 2,710 kg | +32% 205/205-4 |
| Wheelbase declared | 77.8 in · 1,976 mm | 83.1 in · 2,112 mm | +7% 205/205-4 |
| Length declared | 133.0 in · 3,378 mm | 146.1 in · 3,710 mm | +10% 205/205-4 |
| Width declared | 66.7–82.5 in · 1,694–2,096 mm | 76.8–97.2 in · 1,950–2,470 mm | differs |
| Ground clearance declared | 19.7 in · 500 mm | 17.3 in · 440 mm | +14% 5650 |
| Turning radius, braked declared | 8.9 ft · 2.70 m | 11.8 ft · 3.60 m | +33% 205/205-4 |
| Fuel tank declared | 60.2 qt · 57.0 L | 77.1 qt · 73.0 L | +28% 205/205-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGCO-ALLIS 5650 sources
Source
- Source: Traktorenlexikon, “AGCO-Allis 5650”
VALMET 205/205-4 sources
Source
- Source: Traktorenlexikon, “Valmet 205”