Why are tractors used in agriculture

The answer is economic before it is mechanical, and the numbers are startling.

The usual answer is that tractors are stronger than horses. The real answer is that a tractor only eats when it is working.

A draught horse had to be fed, housed, shod and cared for every day of the year, including the months when there was nothing to pull. The feed came from the farm, which meant a share of the land existed to power the farm rather than to produce anything saleable. A tractor sits in a shed costing nothing until it is started.

That is the economic answer, and it arrived before the mechanical one did.

From our database

Median claimed engine power, by the decade a model entered production, across 3,198 published machines. Our records run from 1913 to 2023. Queried 2 October 2026.

Median claimed engine power by decade of first production
DecadeMachinesMedian power
1930s7316.7 kW
1940s8816.8 kW
1950s25620.1 kW
1960s44530.1 kW
1970s53148.6 kW
1980s61049.4 kW
1990s68066.9 kW
2000s47780.4 kW
2010s3883.6 kW

5 times more power per machine, 1930s to 2010s. Read it as labour rather than as horsepower and it says something sharper: one machine and one driver now cover what five machines and five drivers covered.

Two things to be careful of. The decade is when a model ENTERED production, so a design sold for fifteen years sits in the decade it launched. And the 2010s figure rests on 38 machines — our coverage thins for recent models, because the reference works we draw on document older tractors far better than new ones.

What did a horse team actually cost?

Land, mostly, and the bill arrived whether the horses worked or not.

A working horse eats through the winter at close to the rate it eats in spring. The oats and hay came off the farm, and the acreage growing them produced nothing for sale. Contemporary estimates of how much land that took vary widely enough that we will not put a figure on it here — but the direction is not in dispute, and it was a large share.

Add the labour. Horses must be fed, watered, groomed, shod and turned out, every day, by someone. A tractor needs none of that between jobs, and the hours released were as significant as the land.

Then add the working day. A team could work perhaps five hours before it had to rest, and in heat rather less; a tractor works until the operator or the fuel runs out. In a wet autumn, when the window for lifting a crop is measured in days rather than weeks, that difference decides whether the crop comes in at all. Mechanisation did not only reduce the cost of farming — it reduced the risk of it, and the second mattered more than the first to anyone who had lost a harvest to weather.

What did the tractor actually change?

The number of people needed to farm a given area, and therefore where those people went.

One driver with an 16.7 kW machine in the 1930s already did the work of a team and its handler. By the 2010s the median machine we hold is 83.6 kW and pulls implements that did not exist when the earlier tractors were built, because nothing could have pulled them.

The three-point linkage mattered as much as the power. It made implements interchangeable between makers and transferred their draught onto the rear wheels, which is covered in how tractor hydraulic systems work.

What changed about the money?

The cost moved from a recurring one to a capital one, and farms had to learn a different kind of arithmetic.

A horse team was grown rather than bought. A farm bred its replacements, fed them from its own land, and the cost appeared as acreage and labour rather than as an invoice. Nothing had to be borrowed, and nothing was owed to anyone outside the farm.

A tractor is bought. It arrives as a single large sum, usually financed, and it depreciates whether it is used or not. Against that, it consumes nothing standing still, it does not need replacing every few years through breeding, and it works at a rate no team could match — which meant the same machine could cover more land, and the borrowing was repaid out of the extra acreage it made possible.

That is the trade every mechanising farm made, and it is why the machines that sold in the largest numbers were not the most powerful ones but the cheapest ones that were powerful enough. The pattern is visible in the production figures: the best sellers were mid-sized, simple and affordable, and several were among the least powerful tractors of their day.

It also explains why the second-hand market matters so much in farming and barely exists in some other industries. A tractor that is paid for and still working is the cheapest power on the farm, which is why machines from the 1960s and 1970s are still earning their keep — browse what they were in utility tractors.

Why did it take until the 1930s?

Because the early machines were too heavy, too thirsty and too expensive for the farms that needed them.

The first tractors in our records are from 1913, and they were enormous machines for enormous farms. Scaling down was the hard part: a tractor small enough for a mixed farm had to be light enough not to sink, cheap enough to buy, and simple enough to repair in a yard. That combination arrived between the wars, and the machines that found it sold in numbers nothing since has matched — see which tractors are most sold.

What did mechanisation cost?

Soil, mainly, and the bill is still arriving.

Every decade in that table is also a decade of machines getting heavier. Power and weight rise together, because weight is what puts power on the ground, and compacted soil drains badly and yields less. It is the counterweight to the whole story and it is why the modern argument is about tyre pressure and controlled traffic rather than about horsepower.

The machines, by size and era, are in the tractor index and high-power tractors, and how do tractors work explains why weight is a working part rather than a side effect.

Common questions

Why did tractors replace horses?
Because a horse eats whether it works or not. A team had to be fed, housed and cared for through the winter, and the land growing their feed produced no saleable crop. A tractor consumes fuel only while working, and the land that fed the horses could be farmed.
How much more powerful are modern tractors?
Across the machines we publish, the median claimed engine power rose from 18.0 kW in the 1930s to 88.0 kW in the 2010s — 4.9 times. One machine and one driver now do what five would have done.
Could farming go back to horses?
On a small scale it has never entirely stopped, and some low-input systems use them deliberately. At the scale that feeds cities it could not, because the land needed to feed the draught animals would come out of the land growing food.

Sources

  1. Traktorenlexikon, the model articles cited on each tractor's page — Wikibooks, CC BY-SA 4.0. Retrieved . Original
  2. OECD standard codes for the official testing of agricultural tractors — OECD. Figures from these test reports are cited per machine on each model page, from the report records in our database; we hold no fetched copy of the OECD programme's web pages.