How tractor hydraulic systems work
Ferguson's draft control is one of the great pieces of twentieth-century engineering.
A tractor’s hydraulic system is doing three jobs at once. It lifts the rear linkage, it feeds whatever is plugged into the spool valves, and on most machines it steers. Those three compete for the same pump, and most of what feels wrong about a tractor’s hydraulics is that competition going badly.
From our database
Measured across published machines with sourced specifications. Queried 2 October 2026.
Pump flow — 2,374 machines. Bottom tenth 18 L/min, median 42.3, top tenth 109.3. That is 6.1 times more oil a minute at the top than the bottom.
Three-point lift — 2,045 machines. Bottom tenth 1,200 kg, median 2,938 kg, top tenth 7,455 kg — also 6.2 times.
The two spreads landing on the same multiple is a coincidence worth a second look, because it says the two scale together: a machine with twice the lift tends to have roughly twice the flow to work it. That is the sane way to build a tractor, and it means a mismatch between the two on a particular machine is worth asking about.
Open against closed centre — 483 machines, which is only 15% of what we publish. 304 open centre, 179 closed. Separately, 321 machines record load sensing and 52 constant flow.
That coverage figure is the honest caveat. A 304-to-179 split is a real finding about those machines and tells you very little about the rest, because the sources that record the detail are not a random sample — they tend to be the fuller articles about later machines.
What does the pump actually feed?
Three circuits, in descending order of how much they complain.
The linkage lifts and lowers the rear implement, and holds it at a set height or a set depth.
The spool valves feed everything external: a loader, a tipping trailer, a hydraulic top link. This is where flow is felt most, because a loader cycle is a large volume of oil moved quickly.
The steering usually has priority over both, for the obvious reason. On a machine with a shared pump, heavy loader work at low engine revs can leave the steering briefly heavy, which is the system doing exactly what it was designed to do and still feeling alarming.
What is the difference between open and closed centre?
Whether the pump is working when you are not asking it to.
An open-centre system runs oil continuously from pump to tank through the valves. Ask for something and a valve diverts that flow. It is simple, cheap and forgiving, and it wastes energy as heat whenever nothing is happening — which is most of the time.
A closed-centre system holds pressure in the circuit and opens a valve only when something is demanded. The pump destrokes when idle, so it costs almost nothing to stand still. It responds faster, it runs cooler, and it is more expensive to build.
Load sensing sits on top of a closed-centre system and matches pump output to exactly what the service needs, so two implements can run at once without one stealing the other’s oil. 321 machines in our records state it.
Open centre on a small machine is not a compromise, incidentally. On a tractor with one spool valve and a loader it is the right answer, and the cost of the alternative buys nothing.
Why was the three-point linkage a revolution?
Because it made the implement part of the tractor rather than a thing dragged behind it.
Before it, implements were towed from a drawbar. Hit an obstruction with a towed plough and the tractor could rear up and flip backwards over its own rear axle, which killed people regularly. Harry Ferguson’s answer was geometric rather than mechanical: mount the implement on three points — two lower links and a top link — arranged so the line of pull converges ahead of and below the tractor’s centre of gravity.
Two things follow. The implement cannot lever the tractor over, because the forces now push the front down rather than lifting it. And the harder the implement pulls, the more of its draught is transferred as downward force onto the rear wheels — so a plough in heavy going presses the tractor into the ground and increases its grip at exactly the moment it needs it.
That second effect is weight transfer, and it is why a light tractor with a mounted plough out-pulls a heavier one with a towed version.
What does draft control do?
It holds a working depth by feel rather than by position.
The top link is in compression and its load rises as the implement pulls harder, which it does when it runs deeper. Draft control senses that load and raises the linkage slightly until the draught returns to the set value; when the ground lightens, it lowers again. The operator sets a pull rather than a depth, and the machine keeps it across ground that changes.
The alternative, position control, holds the linkage at a fixed height regardless of load — right for a mower, wrong for a plough. Most machines offer both and a blend of the two.
Ferguson’s system combined the geometry and the control into one design, and the combination is why the arrangement on the back of a tractor built this year is recognisably the one he patented.
What should you check when buying?
Flow first, then whether the lift matches what you intend to mount.
Flow is the specification routinely ignored and most often regretted, because its effect is felt every single cycle rather than at the limit. The spread above — 18 to 109.3 L/min — is six to one, and nothing on the brochure makes that obvious.
Then check how many spool valves are fitted and whether more can be added, since a loader and a trailer and a top link are three services on a machine that may have two.
And look at the oil. Hydraulic oil in most tractors is shared with the transmission and the wet brakes, which means it is doing three jobs and collecting the debris from all of them. Dark oil with a burnt smell is a system that has been run hot; milky oil is water, which on a machine with wet brakes is a repair rather than an oil change. The filter interval matters more on a tractor than on almost anything else a farm owns, because the same fluid that lifts the plough also stops the machine.
On a small machine the whole question is simpler, and the specification to check is flow rather than architecture — see what the figures look like across compact tractors.
Machines with their hydraulic figures are in utility tractors and standard-size tractors, and how do tractors work puts the hydraulics in the context of the whole machine.
Common questions
- What is the difference between open and closed centre hydraulics?
- An open-centre system circulates oil back to tank whenever nothing is being asked of it; a closed-centre system holds pressure and releases oil only when a valve opens. Closed centre responds faster and wastes less, and it costs more. Of the 483 machines where we record which is fitted, 304 are open centre and 179 closed.
- How much hydraulic flow do I need?
- It depends on what you are driving rather than on the tractor's size. The median across 2,374 machines is 42.3 litres a minute, but the top tenth move more than 109 litres a minute and a loader feels every one of them.
- What is draft control?
- It holds a working depth automatically by sensing the pull on the top link. When the plough runs deeper and the draught rises, the system lifts slightly; when it runs shallow, it lowers. It is why a tractor can hold a depth across uneven ground without the operator touching anything.
Sources
- Traktorenlexikon, the model articles cited on each tractor's page — Wikibooks, CC BY-SA 4.0. Retrieved . Original
- OECD standard codes for the official testing of agricultural tractors — OECD. Figures from these test reports are cited per machine on each model page, from the report records in our database; we hold no fetched copy of the OECD programme's web pages.