- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1999–2002
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
ZETOR 11641 Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the 11641.
Engine power, claimed · gross or net not stated
108.5 hp
80.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Zetor 11641 (1999-2002)”, claimed
How much will an 11641 lift?
An 11641 lifts 11,938 lb (5,415 kg) at the lower-link ends.
| Pump flow | 17.2 gpm · 65.0 L/min |
|---|---|
| Hydraulic pressure | 1,813 psi · 125 bar |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 11,938 lb · 5,415 kg |
| Hitch control | Lifting, lowering, floating position and position, mixed and draft control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Zetor 11641 (1999-2002)”
What PTO does an 11641 have?
An 11641 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,913 rpm |
| Rear PTO shaft | 1 3/8" - 6 splines and 1 3/8" - 21 splines |
| Front PTO available, optional | Yes |
| PTO power, claimed | 86.6 hp · 64.6 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Zetor 11641 (1999-2002)”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “Zetor 11641 (1999-2002)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Zetor 11641 (1999-2002) — CC BY-SA 4.0, WIKIBOOKS-TL-112430 · revision 989266. Wikibooks contributors (Traktorenlexikon). Original document