- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1998–2004
WhichTractor size, not the maker’s category
VALMET Mega 8150 HiTech Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the Mega 8150 HiTech.
Engine power, claimed · gross or net not stated
123.2 hp
91.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet Mega-8150 HiTech”, claimed
How much will a Mega 8150 HiTech lift?
A Mega 8150 HiTech lifts 12,972 lb (5,884 kg) at the lower-link ends.
| Pump flow | 20.4 gpm · 77.4 L/min |
|---|---|
| Hydraulic pressure | 3,046 psi · 210 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 12,972 lb · 5,884 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Valmet Mega-8150 HiTech”
What PTO does a Mega 8150 HiTech have?
A Mega 8150 HiTech has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,874 rpm |
| Engine speed at 540 PTO, optional | 1,539 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 111.8 hp · 83.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet Mega-8150 HiTech”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Valmet Mega-8150 HiTech”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet Mega-8150 HiTech — CC BY-SA 4.0, WIKIBOOKS-TL-116514 · revision 1000207. Wikibooks contributors (Traktorenlexikon). Original document