- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1997–2002
WhichTractor size, not the maker’s category
VALMET 900 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 900.
Engine power, claimed · gross or net not stated
88.8 hp
66.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 900/II”, claimed
How much will a 900 lift?
A 900 lifts 7,419 lb (3,365 kg) at the lower-link ends.
| Hydraulic control | Constant flow |
|---|---|
| Pump flow | 14.7 gpm · 55.7 L/min |
| Steering pump flow | 5.8 gpm · 22.0 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 7,419 lb · 3,365 kg |
| Hitch control | lifting, lowering, floating position, position, mixed, positional and draft control |
Source · Traktorenlexikon, “Valmet 900/II”
What PTO does a 900 have?
A 900 has a 540E/540 rpm rear PTO.
| Rear PTO speeds | 540E/540 rpm |
|---|---|
| Engine speed at 540 PTO | 1,890 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
| PTO power, claimed | 72.4 hp · 54.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 900/II”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Valmet 900/II”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 900/II — CC BY-SA 4.0, WIKIBOOKS-TL-116445 · revision 998942. Wikibooks contributors (Traktorenlexikon). Original document