- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1983–1989
WhichTractor size, not the maker’s category
VALMET 705/705-4 Hydraulics & PTO specs
10 hydraulics and PTO values on record for the 705/705-4.
Engine power, claimed · gross or net not stated
82 hp
61 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 705”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a 705/705-4 have?
Hydraulic and hitch specifications for the 705/705-4 are below.
| Pump flow | 12.7 gpm · 48.0 L/min |
|---|---|
| Steering pump flow | 4.4 gpm · 16.8 L/min |
| Hydraulic pressure | 3,191 psi · 220 bar |
| Three-point hitch category | Category 2 |
| Hitch control | Lifting, lowering, lowering throttle, float, position, draft and mixed control |
Source · Traktorenlexikon, “Valmet 705”
What PTO does a 705/705-4 have?
A 705/705-4 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,860 rpm |
Source · Traktorenlexikon, “Valmet 705”
Sources and how this page was built
10 hydraulics and PTO values from Traktorenlexikon, “Valmet 705”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 705 — CC BY-SA 4.0, WIKIBOOKS-TL-116351 · revision 998093. Wikibooks contributors (Traktorenlexikon). Original document