- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1971–1982
WhichTractor size, not the maker’s category
VALMET 502 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 502.
Engine power, claimed · gross or net not stated
48 hp
36 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 502”, claimed
How much will a 502 lift?
A 502 lifts 3,748 lb (1,700 kg) at the lower-link ends.
| Pump flow | 8.2 gpm · 30.9 L/min |
|---|---|
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 3,748 lb · 1,700 kg |
| Hitch control | Position, draft and mixed control |
Source · Traktorenlexikon, “Valmet 502”
What PTO does a 502 have?
A 502 has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,721 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 40 hp · 30.2 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 502”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Valmet 502”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 502 — CC BY-SA 4.0, WIKIBOOKS-TL-116323 · revision 997104. Wikibooks contributors (Traktorenlexikon). Original document