- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1993–1997
WhichTractor size, not the maker’s category
VALMET 465 (465-4) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 465 (465-4).
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 465”, claimed
How much will a 465 (465-4) lift?
A 465 (465-4) lifts 5,688 lb (2,580 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 14.5 gpm · 55.0 L/min |
| Steering pump flow | 3.8 gpm · 14.5 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 5,688 lb · 2,580 kg |
Source · Traktorenlexikon, “Valmet 465”
What PTO does a 465 (465-4) have?
A 465 (465-4) has a 540E/540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540E/540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
| PTO power, claimed | 56.3 hp · 42.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 465”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Valmet 465”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 465 — CC BY-SA 4.0, WIKIBOOKS-TL-116427 · revision 998452. Wikibooks contributors (Traktorenlexikon). Original document