- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1993–1996
WhichTractor size, not the maker’s category
VALMET 4100 Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 4100.
Engine power, claimed · gross or net not stated
52 hp
39 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 4100”, claimed
How much will a 4100 lift?
A 4100 lifts 6,294 lb (2,855 kg) at the lower-link ends.
| Pump flow | 10.3 gpm · 39.0 L/min |
|---|---|
| Steering pump flow | 3.3 gpm · 12.5 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 6,294 lb · 2,855 kg |
| Hitch control | Lifting, lowering, floating position, position, mixed, draft control |
Source · Traktorenlexikon, “Valmet 4100”
What PTO does a 4100 have?
A 4100 has a 540E/540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540E/540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
| PTO power, claimed | 43.6 hp · 32.5 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Valmet 4100”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Valmet 4100”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 4100 — CC BY-SA 4.0, WIKIBOOKS-TL-116446 · revision 998944. Wikibooks contributors (Traktorenlexikon). Original document