• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1971–1975

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

URSUS C-355 P Full specifications

URSUS/ZM S-4002 four-cylinder diesel. The manufacturer claimed 49.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

49.3 hp

36.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ursus C-355”, claimed

Weight
4,852 lb
3-point lift
3,968 lb
Hyd. flow
5.3 gpm
Top speed
15.5 mph

URSUS C-355 P specs: key facts

  • The URSUS C-355 P was built from 1971 to 1975.

  • The URSUS C-355 P has a claimed engine power (gross or net not stated) of 36.8 kW (49.3 hp); it has no measured PTO figure.

  • The URSUS C-355 P is two-wheel drive (2WD).

  • The URSUS C-355 P has a URSUS/ZM S-4002 engine, a 4-cylinder 3.12 L diesel unit.

  • The URSUS C-355 P weighs 2,201 kg (4,852 lb) unladen.

  • The URSUS C-355 P has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the URSUS C-355 P lifts 1,800 kg (3,968 lb) at the lower-link ends.

  • The hydraulic pump of the URSUS C-355 P delivers 20.0 L/min (5.3 gpm).

Source · Traktorenlexikon, “Ursus C-355”

How much horsepower does a C-355 P have?

The only figure for the C-355 P is 49.3 hp (36.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
49.3 hp

Source · Traktorenlexikon, “Ursus C-355”

What engine is in a C-355 P?

A C-355 P has an URSUS/ZM S-4002, a 4-cylinder 3.12 L diesel engine.

Engine — C-355 P engine specifications
Make & modelURSUS/ZM S-4002
Cylinders4, liquid-cooled
Displacement190.3 ci · 3.12 L
Max torque142 lb·ft · 193 N·m @ 1,600 rpm
Electrical system12 V

Source · Traktorenlexikon, “Ursus C-355”

How much will a C-355 P lift, and what is its hydraulic flow?

A C-355 P lifts 3,968 lb (1,800 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — C-355 P hydraulics and PTO specifications
Pump flow5.3 gpm · 20.0 L/min
Hitch categoryCategory 2
Lift at ends3,968 lb · 1,800 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,994 engine rpmGround-speed PTO available

Source · Traktorenlexikon, “Ursus C-355”

What transmission does a C-355 P have?

Transmission specifications for the C-355 P are below.

Transmission — C-355 P transmission specifications
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Ursus C-355”

How much does a C-355 P weigh?

A C-355 P weighs 4,852 lb (2,201 kg) unladen.

Weights & dimensions — C-355 P weights and dimensions
Unladen weight4,852 lb · 2,201 kg
Wheelbase83.7 in · 2,125 mm
Length128.0 in · 3,250 mm
Width70.9 in · 1,800 mm
Height63.8 in · 1,620 mm
Ground clearance17.2 in · 436 mm
Front track53.1–68.9 in · 1,350–1,750 mm
Rear track53.1–70.9 in · 1,350–1,800 mm
Turning radius, braked10.5 ft · 3.19 m

Source · Traktorenlexikon, “Ursus C-355”

Which tractors compare with a C-355 P?

Within 10% of its 48.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a C-355 P two-wheel drive or four-wheel drive?

The URSUS C-355 P is two-wheel drive (2WD).

What PTO does a C-355 P have?

A C-355 P has a independent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Ursus C-355”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ursus C-355CC BY-SA 4.0, WIKIBOOKS-TL-120034 · revision 1044605. Wikibooks contributors (Traktorenlexikon). Original document