- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1992–1997
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Steyr 964 (a) Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the 964 (a).
Engine power, claimed · gross or net not stated
63.2 hp
47.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 964”, claimed
How much will a 964 (a) lift?
A 964 (a) lifts 6,437 lb (2,920 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 11.2 gpm · 42.3 L/min |
| Steering pump flow | 9.2 gpm · 35.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 6,437 lb · 2,920 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 964”
What PTO does a 964 (a) have?
A 964 (a) has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 964”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “Steyr 964”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 964 — CC BY-SA 4.0, WIKIBOOKS-TL-85791 · revision 993739. Wikibooks contributors (Traktorenlexikon). Original document