- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1995–1997
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Steyr 9200 a Hydraulics & PTO specifications
9 hydraulics and PTO values on record for the 9200 a.
Engine power, claimed · gross or net not stated
197.4 hp
147.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 9200”, claimed
What hydraulics does a 9200 a have?
Hydraulic and hitch specifications for the 9200 a are below.
| Pump flow | 29.1 gpm · 110.1 L/min |
|---|---|
| Steering pump flow | 8.5 gpm · 32.0 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves, optional | 3 |
| Lift capacity (point not stated) | 18,916 lb · 8,580 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 9200”
What PTO does a 9200 a have?
A 9200 a has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 1,993 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 9200”
Where this page comes from
9 hydraulics and PTO values from Traktorenlexikon, “Steyr 9200”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 9200 — CC BY-SA 4.0, WIKIBOOKS-TL-108131 · revision 1016418. Wikibooks contributors (Traktorenlexikon). Original document