- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1986–1993
- 292 built
WhichTractor size, not the maker’s category
Steyr 8180a Hydraulics & PTO specs
9 hydraulics and PTO values on record for the 8180 a.
Engine power, claimed · gross or net not stated
158.0 hp
117.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8180”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 8180 a lift?
An 8180 a lifts 14,595 lb (6,620 kg) at the lower-link ends.
| Pump flow | 13.8 gpm · 52.4 L/min |
|---|---|
| Hydraulic pressure | 3,553 psi · 245 bar |
| Lift capacity at ball ends | 14,595 lb · 6,620 kg |
Source · Traktorenlexikon, “Steyr 8180”
What PTO does an 8180 a have?
An 8180 a has a 1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 1000 rpm |
| Engine speed at 540 PTO | 1,826 rpm |
| Rear PTO shaft | 1 3/8"- 21 teilig (Form-2) |
Source · Traktorenlexikon, “Steyr 8180”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “Steyr 8180”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8180 — CC BY-SA 4.0, WIKIBOOKS-TL-85386 · revision 1089871. Wikibooks contributors (Traktorenlexikon). Original document