- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1980–1986
WhichTractor size, not the maker’s category
Steyr 8170a Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 8170 a.
Engine power, claimed · gross or net not stated
148.0 hp
110.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8170”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does an 8170 a have?
Hydraulic and hitch specifications for the 8170 a are below.
| Pump flow | 11.1 gpm · 42.0 L/min |
|---|---|
| Steering pump flow | 9.0 gpm · 34.0 L/min |
| Hydraulic pressure | 3,553 psi · 245 bar |
| Rear remote valves | 1 |
| Lift capacity (point not stated) | 14,418 lb · 6,540 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8170”
What PTO does an 8170 a have?
An 8170 a has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,826 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8170”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Steyr 8170”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8170 — CC BY-SA 4.0, WIKIBOOKS-TL-84974 · revision 1057264. Wikibooks contributors (Traktorenlexikon). Original document