- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- from 1984
WhichTractor size, not the maker’s category
Steyr 8130 (a) Hydraulics & PTO specs
14 hydraulics and PTO values on record for the 8130 (a).
Engine power, claimed · gross or net not stated
108.6 hp
81.0 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 8130”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 8130 (a) lift?
An 8130 (a) lifts 4,850 lb (2,200 kg) at the lower-link ends.
| Pump flow | 10.6 gpm · 40.0 L/min |
|---|---|
| Steering pump flow | 8.7 gpm · 33.0 L/min |
| Hydraulic pressure | 3,553 psi · 245 bar |
| Rear remote valves, optional | 3 |
| Lift capacity at ball ends | 4,850 lb · 2,200 kg |
| Lift capacity (point not stated) | 10,582 lb · 4,800 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8130”
What PTO does an 8130 (a) have?
An 8130 (a) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,057 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-I) |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr 8130”
Sources and how this page was built
14 hydraulics and PTO values from Traktorenlexikon, “Steyr 8130”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 8130 — CC BY-SA 4.0, WIKIBOOKS-TL-68221 · revision 1077626. Wikibooks contributors (Traktorenlexikon). Original document