- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1977–1979
WhichTractor size, not the maker’s category
Steyr 658 (a) Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 658 (a).
Engine power, claimed · gross or net not stated
54.3 hp
40.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 658”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 658 (a) lift?
A 658 (a) lifts 5,291 lb (2,400 kg) at the lower-link ends.
| Pump flow | 9.0 gpm · 34.0 L/min |
|---|---|
| Hydraulic pressure | 2,489 psi · 172 bar |
| Rear remote valves, optional | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 5,291 lb · 2,400 kg |
Source · Traktorenlexikon, “Steyr 658”
What PTO does a 658 (a) have?
A 658 (a) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Live |
| Rear PTO speeds | 540/1000 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-A) |
| Front PTO available, optional | Yes |
| PTO power, claimed | 48.8 hp · 36.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Steyr 658”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Steyr 658”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 658 — CC BY-SA 4.0, WIKIBOOKS-TL-84833 · revision 993712. Wikibooks contributors (Traktorenlexikon). Original document