- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1966–1967
- 2,265 built
WhichTractor size, not the maker’s category
Steyr 290 Hydraulics & PTO specs
9 hydraulics and PTO values on record for the 290.
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 290”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 290 lift?
A 290 lifts 4,079 lb (1,850 kg) at the lower-link ends.
| Pump flow | 8.5 gpm · 32.0 L/min |
|---|---|
| Hydraulic pressure | 2,489 psi · 172 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 4,079 lb · 1,850 kg |
Source · Traktorenlexikon, “Steyr 290”
What PTO does a 290 have?
A 290 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Front PTO available | Yes |
| PTO power, claimed | 44 hp · 33.1 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Steyr 290”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “Steyr 290”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 290 — CC BY-SA 4.0, WIKIBOOKS-TL-84298 · revision 993701. Wikibooks contributors (Traktorenlexikon). Original document