- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1962–1966
- 6,253 built
WhichTractor size, not the maker’s category
Steyr 288 Hydraulics & PTO specifications
10 hydraulics and PTO values on record for the 288.
Engine power, claimed · gross or net not stated
44.4 hp
33.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 288”, claimed
How much will a 288 lift?
A 288 lifts 3,527 lb (1,600 kg) at the lower-link ends.
| Pump flow | 8.5 gpm · 32.0 L/min |
|---|---|
| Hydraulic pressure | 2,134 psi · 147 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 3,527 lb · 1,600 kg |
Source · Traktorenlexikon, “Steyr 288”
What PTO does a 288 have?
A 288 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-A) |
| Front PTO available | Yes |
| PTO power, claimed | 39 hp · 29.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Steyr 288”
Where this page comes from
10 hydraulics and PTO values from Traktorenlexikon, “Steyr 288”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 288 — CC BY-SA 4.0, WIKIBOOKS-TL-62780 · revision 1057263. Wikibooks contributors (Traktorenlexikon). Original document