WhichTractor
  • Rigid chassis
  • WhichTractor size: High-power
  • No lab test on file
  • 1997–1999

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Steyr-Case 9250a specs: hp, weight, years

CASE-IH 6TA-830 six-cylinder diesel. The manufacturer claimed 235.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

235.9 hp

175.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Steyr 9250 a”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
18,170 lb
Hyd. flow
29.7 gpm
Top speed
18.6–24.9 mph

Steyr-Case 9250a specs: key facts

  • The Steyr-Case 9250a was built from 1997 to 1999.

  • The Steyr-Case 9250a has a claimed engine power (gross or net not stated) of 175.9 kW (235.9 hp); it has no measured PTO figure.

  • The Steyr-Case 9250a is four-wheel drive (4WD).

  • The Steyr-Case 9250a has a CASE-IH 6TA-830 engine, a 6-cylinder 8.27 L diesel unit.Source 1

  • The Steyr-Case 9250a weighs 8,242 kg (18,170 lb) unladen.

  • The Steyr-Case 9250a has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Steyr-Case 9250a delivers 112.4 L/min (29.7 gpm).

Source · Traktorenlexikon, “Steyr 9250 a”

How does the 9250a compare with its class?

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 84 tractors within 10% of its power, 20% carry one.

Derived by WhichTractor from 84 comparable records. How we work this out

Illustration of the 1997–1999 Steyr-Case 9250 a, a 236 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a 9250a have?

The only figure for the 9250a is 235.9 hp (175.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
235.9 hp

Source · Traktorenlexikon, “Steyr 9250 a”

What engine is in a 9250a?

A 9250a has a CASE-IH 6TA-830, a 6-cylinder 8.27 L diesel engine.

Engine — 9250a engine specifications
Make & modelCASE-IH 6TA-830
Cylinders6, liquid-cooledSource 2
Displacement504.6 ci · 8.27 L
Max torque771 lb·ft · 1,045 N·m @ 1,200 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Steyr 9220 a”

How much will a 9250a lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 9250a are below.

Hydraulics & PTO — 9250a hydraulics and PTO specifications
Pump flow29.7 gpm · 112.4 L/min
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,171 engine rpm
PTO shaft1 3/8"- 6 splines (form-1) and 1 3/8"- 21 parts (form-2)

Source · Traktorenlexikon, “Steyr 9250 a”

What transmission does a 9250a have?

Transmission specifications for the 9250a are below.

Transmission — 9250a transmission specifications
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Steyr 9250 a”

How much does a 9250a weigh?

A 9250a weighs 18,170 lb (8,242 kg) unladen.

Weights & dimensions — 9250a weights and dimensions
Unladen weight18,170 lb · 8,242 kg
Maximum permissible mass25,519 lb · 11,575 kg
Wheelbase118.3 in · 3,006 mm
Length200.4 in · 5,090 mm
Width120.0–153.1 in · 3,048–3,890 mm
Height121.1 in · 3,077 mm
Ground clearance19.3 in · 489 mm
Front track60.1–88.0 in · 1,527–2,235 mm
Rear track64.0–132.0 in · 1,626–3,353 mm

Source · Traktorenlexikon, “Steyr 9250 a”

What oil does a 9250a take, and how much?

A 9250a engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

9250a fluid capacities, grades and service intervals
SystemCapacity
Engine oil20.1 qt · 19.0 LSource: Traktorenlexikon, “Steyr 9250 a” · single source, not independently verified
Hydraulic201.8 qt · 191.0 LSource: Traktorenlexikon, “Steyr 9250 a” · single source, not independently verified
Front axle12.0 qt · 11.4 LSource: Traktorenlexikon, “Steyr 9250 a” · single source, not independently verified
Cooling system32.8 qt · 31.0 LSource: Traktorenlexikon, “Steyr 9250 a” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 9250a?

Within 10% of its 235.9 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Steyr-Case 9250a

Is a 9250a two-wheel drive or four-wheel drive?

The Steyr-Case 9250a is four-wheel drive (4WD).

What PTO does a 9250a have?

A 9250a has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines (form-1) and 1 3/8"- 21 parts (form-2) shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Steyr 9220 a”; and Traktorenlexikon, “Steyr 9250 a”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Steyr 9220 a — CC BY-SA 4.0, WIKIBOOKS-TL-108143 · revision 993770. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Steyr 9250 a — CC BY-SA 4.0, WIKIBOOKS-TL-108144 · revision 993771. Wikibooks contributors (Traktorenlexikon). Original document