- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1985–1987
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
SAME Explorer 75 (DT) Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the Explorer 75 (DT).
Engine power, claimed · gross or net not stated
74.0 hp
55.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “SAME Explorer 75”, claimed
How much will an Explorer 75 (DT) lift?
An Explorer 75 (DT) lifts 7,606 lb (3,450 kg) at the lower-link ends.
| Hydraulic control | Load sensing |
|---|---|
| Pump flow | 9.5 gpm · 36.0 L/min |
| Hydraulic pressure | 1,740 psi · 120 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 7,606 lb · 3,450 kg |
| Hitch control | Lifting, lowering and floating position, draft, mixed and position control |
Source · Traktorenlexikon, “SAME Explorer 75”
What PTO does an Explorer 75 (DT) have?
An Explorer 75 (DT) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 2,198 rpm |
Source · Traktorenlexikon, “SAME Explorer 75”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “SAME Explorer 75”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: SAME Explorer 75 — CC BY-SA 4.0, WIKIBOOKS-TL-114686 · revision 993525. Wikibooks contributors (Traktorenlexikon). Original document