- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1978–1985
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
SAME Centurion 75 (DT) Hydraulics & PTO specifications
6 hydraulics and PTO values on record for the Centurion 75 (DT).
Engine power, claimed · gross or net not stated
72.0 hp
53.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “SAME Centurion 75”, claimed
How much will a Centurion 75 (DT) lift?
A Centurion 75 (DT) lifts 5,952 lb (2,700 kg) at the lower-link ends.
| Pump flow | 5.8 gpm · 22.0 L/min |
|---|---|
| Hydraulic pressure | 2,973 psi · 205 bar |
| Lift capacity at ball ends | 5,952 lb · 2,700 kg |
Source · Traktorenlexikon, “SAME Centurion 75”
What PTO does a Centurion 75 (DT) have?
A Centurion 75 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 1,967 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “SAME Centurion 75”
Where this page comes from
6 hydraulics and PTO values from Traktorenlexikon, “SAME Centurion 75”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: SAME Centurion 75 — CC BY-SA 4.0, WIKIBOOKS-TL-114632 · revision 993507. Wikibooks contributors (Traktorenlexikon). Original document