- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1957–1961
- 7,548 built
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Nuffield Universal-3 (3 DL) Hydraulics & PTO specs
8 hydraulics and PTO values on record for the Universal-3 (3 DL).
Engine power, claimed · gross or net not stated
37.0 hp
27.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Nuffield Universal 3 (1957-1961)”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an Universal-3 (3 DL) lift?
An Universal-3 (3 DL) lifts 2,831 lb (1,284 kg) at the lower-link ends.
| Pump flow | 7.2 gpm · 27.3 L/min |
|---|---|
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 2,831 lb · 1,284 kg |
Source · Traktorenlexikon, “Nuffield Universal 3 (1957-1961)”
What PTO does an Universal-3 (3 DL) have?
An Universal-3 (3 DL) has a 540 rpm rear PTO.
| Rear PTO drive | Transmission-driven |
|---|---|
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 1,430 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| PTO power, claimed | 26.9 hp · 20.1 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Nuffield Universal 3 (1957-1961)”
Sources and how this page was built
8 hydraulics and PTO values from Traktorenlexikon, “Nuffield Universal 3 (1957-1961)”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Nuffield Universal 3 (1957-1961) — CC BY-SA 4.0, WIKIBOOKS-TL-116025 · revision 998383. Wikibooks contributors (Traktorenlexikon). Original document