WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 2002–2007
  • Record: Traktorenlexikon

WhichTractor size, not the maker’s category

New Holland TM 190 Hydraulics & PTO specs

20 hydraulics and PTO values on record for the TM 190.

Engine power, claimed · gross or net not stated

191.4 hp

142.7 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “New Holland TM 190”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

What hydraulics does a TM 190 have?

Hydraulic and hitch specifications for the TM 190 are below.

Hydraulics & hitch — TM 190 Hydraulics & hitch
Pump flow28.7 gpm · 108.5 L/min
Steering pump flow17.0 gpm · 64.3 L/min
Hydraulic pressure, optional2,132 psi · 147 bar
Rear remote valves4
Front hitch available, optionalYes

Source · Traktorenlexikon, “New Holland TM 190”

What PTO does a TM 190 have?

A TM 190 has a 540E/1000 rpm rear PTO.

PTO — TM 190 PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
PTO engages under loadYes
Rear PTO speeds540E/1000 rpm
Engine speed at 540 PTO2,154 rpm
Front PTO available, optionalYes

Source · Traktorenlexikon, “New Holland TM 190”

How much power does a TM 190 deliver at the PTO?

On OECD Test 2144, the TM 190 delivered 172.1 hp (128.3 kW) at the PTO shaft, at maximum power.

OECD Test 2144 — TM 190 as tested, configuration as printed: “4 WD · MFC7CG1 - 19 speeds - 50 km/h”
PTO power, at maximum power172.1 hp · 128.3 kWAt 831 PTO rpmAt 1,790 engine rpm
PTO power, at rated engine speed163.6 hp · 122.0 kWAt 1,021 PTO rpmAt 2,199 engine rpm
PTO power, at standard PTO speed167.4 hp · 124.8 kWAt 1,000 PTO rpmAt 2,153 engine rpm
PTO shaft speed, at maximum power831 rpm
PTO shaft speed, at rated engine speed1,021 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power37.0 hp · 27.6 kW
Hydraulic pump delivery, at maximum power25.0 gpm · 94.5 L/min
Three-point lift force14,073 lbf · 62.6 kN

Source · OECD test report 2144, 2004

Sources and how this page was built

20 hydraulics and PTO values from Traktorenlexikon, “New Holland TM 190”; and OECD test report 2144, 2004.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 144: New Holland TM 190 — Licence not stated by the publisher; facts cited, OECD-2144 · published 2004-07-13 · retrieved 2026-09-14. OECD; testing station SRI, Silsoe, United Kingdom. Original document
  2. Traktorenlexikon: New Holland TM 190 — CC BY-SA 4.0, WIKIBOOKS-TL-110750 · revision 993143. Wikibooks contributors (Traktorenlexikon). Original document