• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: High-power
  • Lab tested ×1
  • 2002–2005
  • Record: Traktorenlexikon

WhichTractor size, not the maker’s category

New Holland TG 285 Hydraulics & PTO specifications

21 hydraulics and PTO values on record for the TG 285.

Engine power, claimed · gross or net not stated

279.1 hp

208.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “New Holland TG285”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

What hydraulics does a TG 285 have?

Hydraulic and hitch specifications for the TG 285 are below.

Hydraulics & hitch — TG 285 Hydraulics & hitch
Hydraulic controlLoad sensing
Pump flow41.8 gpm · 158.4 L/min
Hydraulic pressure3,597 psi · 248 bar
Rear remote valves4
Front hitch available, optionalYes

Source · Traktorenlexikon, “New Holland TG285”

What PTO does a TG 285 have?

A TG 285 has a 540 rpm / 1000 rpm rear PTO.

PTO — TG 285 PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
PTO engages under loadYes
Rear PTO speeds540 rpm / 1000 rpm
Engine speed at 540 PTO1,984 rpm
Rear PTO shaft1 3/8"- 21 splines or 1 3/8"- 6 splines
Front PTO available, optionalYes

Source · Traktorenlexikon, “New Holland TG285”

How much power does a TG 285 deliver at the PTO?

On OECD Test 2189, the TG 285 delivered 274.8 hp (204.9 kW) at the PTO shaft, at maximum power.

OECD Test 2189 — TG 285 as tested, configuration as printed: “4 WD · MFWD”
PTO power, at maximum power274.8 hp · 204.9 kWAt 1,000 PTO rpmAt 1,982 engine rpm
PTO power, at rated engine speed241.5 hp · 180.1 kWAt 1,110 PTO rpmAt 2,199 engine rpm
PTO power, at standard PTO speed274.8 hp · 204.9 kWAt 1,000 PTO rpmAt 1,982 engine rpm
PTO shaft speed, at maximum power1,000 rpm
PTO shaft speed, at rated engine speed1,110 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power62.6 hp · 46.7 kW
Hydraulic pump delivery, at maximum power37.6 gpm · 142.3 L/min
Three-point lift force21,739 lbf · 96.7 kN

Source · OECD test report 2189, 2004

Where this page comes from

21 hydraulics and PTO values from Traktorenlexikon, “New Holland TG285”; and OECD test report 2189, 2004.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 189: New Holland TG 285 — Licence not stated by the publisher; facts cited, OECD-2189 · published 2004-10-25 · retrieved 2026-09-14. OECD. Original document
  2. Traktorenlexikon: New Holland TG285 — CC BY-SA 4.0, WIKIBOOKS-TL-110833 · revision 993199. Wikibooks contributors (Traktorenlexikon). Original document