- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×1
- 2007–2011
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
New Holland T 7030 Hydraulics & PTO specs
22 hydraulics and PTO values on record for the T 7030.
Engine power, claimed · gross or net not stated
164.7 hp
122.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “New Holland T7030 Power Command”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a T 7030 lift?
A T 7030 lifts 19,063 lb (8,647 kg) at the lower-link ends.
| Pump flow | 32.0 gpm · 121.0 L/min |
|---|---|
| Steering pump flow | 17.6 gpm · 66.5 L/min |
| Hydraulic pressure | 3,336 psi · 230 bar |
| Rear remote valves | 4 |
| Lift capacity at ball ends | 19,063 lb · 8,647 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “New Holland T7030 Power Command”
What PTO does a T 7030 have?
A T 7030 has a 540/540E/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/540E/1000 rpm |
| Engine speed at 540 PTO | 1,950 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines (Form-1) or 1 3/8"- 21 parts (Form-2) |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “New Holland T7030 Power Command”
How much power does a T 7030 deliver at the PTO?
On OECD Test 2409, the T 7030 delivered 163.2 hp (121.7 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 163.2 hp · 121.7 kWAt 836 PTO rpmAt 1,800 engine rpm |
|---|---|
| PTO power, at rated engine speed | 139.7 hp · 104.2 kWAt 1,022 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 141.5 hp · 105.5 kWAt 1,000 PTO rpmAt 2,153 engine rpm |
| PTO shaft speed, at maximum power | 836 rpm |
| PTO shaft speed, at rated engine speed | 1,022 rpm |
| PTO shaft speed, at standard PTO speed | 1,000 rpm |
| Hydraulic power, at maximum power | 38.2 hp · 28.5 kW |
| Hydraulic pump delivery, at maximum power | 25.8 gpm · 97.7 L/min |
| Three-point lift force | 12,230 lbf · 54.4 kN |
Source · OECD test report 2409, 2008
Sources and how this page was built
22 hydraulics and PTO values from Traktorenlexikon, “New Holland T7030 Power Command”; and OECD test report 2409, 2008.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 409: New Holland T7030 — Licence not stated by the publisher; facts cited, OECD-2409 · published 2008-05-30 · retrieved 2026-09-14. OECD; testing station FJ-BLT, Wieselburg, Austria. Original document
- Traktorenlexikon: New Holland T7030 Power Command — CC BY-SA 4.0, WIKIBOOKS-TL-111368 · revision 993239. Wikibooks contributors (Traktorenlexikon). Original document