- Standard layout, Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1958–1961
WhichTractor size, not the maker’s category
Massey Ferguson MF 65 Hydraulics & PTO specifications
8 hydraulics and PTO values on record for the MF 65.
Engine power, claimed · gross or net not stated
57 hp
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 65”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an MF 65 lift?
An MF 65 lifts 2,500 lb (1,134 kg) at the lower-link ends.
| Pump flow | 4.0 gpm · 15.1 L/min |
|---|---|
| Hydraulic pressure | 2,489 psi · 172 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 2,500 lb · 1,134 kg |
Source · Traktorenlexikon, “Massey Ferguson MF 65”
What PTO does an MF 65 have?
An MF 65 has a 540 rpm rear PTO.
| Rear PTO speeds | 540 rpm |
|---|---|
| Engine speed at 540 PTO | 1,500 rpm |
| Rear PTO shaft | 29 x 34,9 x 9,7 mm |
| PTO power, claimed | 51.2 hp · 38.2 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Massey Ferguson MF 65”
Where this page comes from
8 hydraulics and PTO values from Traktorenlexikon, “Massey Ferguson MF 65”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 65 — CC BY-SA 4.0, WIKIBOOKS-TL-76621 · revision 1089751. Wikibooks contributors (Traktorenlexikon). Original document